Home › Engines › MA1 / 9A1 (987.2, 997.2, 981, 991.1)
Porsche bore scoring on the MA1 / 9A1 (987.2, 997.2, 981, 991.1)
Porsche bore scoring on the MA1 (9A1) engine family of the 987.2, 997.2, 981 and 991.1 is reported at a lower rate than on the earlier engines, and a press test calls the 997.2 clearly more robust.[2][3][5][8][16]
Reported lower rate · Reported means one technical source or owner reports only.
| Engine | Bore surface | Used in |
|---|---|---|
| MA1 family (9A1), 2.7 to 3.8 l | Alusil | 987.2, 997.2 Carrera, 981, 991.1 |
Where this engine is fitted
| Model | Generation | Model years |
|---|---|---|
| 911 | 997.2 | 2009–2012 |
| 911 | 991.1 | 2012–2016 |
| Boxster | 987.2 | 2009–2012 |
| Boxster | 981 | 2013–2016 |
| Cayman | 987.2 | 2009–2012 |
| Cayman | 981 | 2013–2016 |
What the sources say
Reported at a lower rate than the earlier engines.[2][3]
The press test calls the 997.2 clearly more robust.[5]
Two workshops say these engines score far less often but not never; one adds that the base 2.7 and 2.9 almost never score.[8][16]
No fleet-wide failure rate is published. Workshop figures quoted in a 2015 magazine article are on the start page.[7]
What to have checked
- Rising oil consumption.[1][2] Two sources agree
- Ticking or tapping from piston slap, often taken for lifter noise.[1][2] Two sources agree
- One tailpipe sootier than the other.[1][5] Two sources agree
- A borescope look at the cylinder walls is the most direct confirmation.[1][2] Two sources agree
- Oil analysis alone does not confirm scoring.[1][2] Two sources agree
- Compression and leak-down tests can stay normal in early scoring.[1][19] Two sources agree
The lasting repair named by both engine builders replaces the bore surface with Nikasil-plated aluminium cylinders.[1][3] Costs vary by market; see cost figures.
Check another engine →Cite this
Porsche bore scoring on the MA1 (9A1) engine family of the 987.2, 997.2, 981 and 991.1 is reported at a lower rate than on the earlier engines, and a press test calls the 997.2 clearly more robust. Source: Porsche bore scoring on the MA1 / 9A1 (987.2, 997.2, 981, 991.1), https://borescoring.com/engines/ma1-9a1/ (checked 2026-11-20).
Sources
- [1]LN Engineering: Porsche Cylinder Bore Scoring
- [2]LN Engineering: What Is Porsche Cylinder Bore Scoring
- [3]Hartech, Barry Hart: bore scoring report, as posted on Rennlist
- [4]LN Engineering: Bore Scoring Repair Costs
- [5]Auto Bild: Porsche 911, five generations in the used-car check, 22 September 2026
- [7]GT Porsche (Peter Morgan): M96/97 engines, cylinder bore scoring, March 2015
- [8]Backshop Technik: Porsche bore scoring, how it is checked
- [16]Motorschmiede: Porsche 997 engine problems (de)
- [19]A&B Import Auto: Porsche bore scoring diagnosis
Checked 2026-11-20 · last updated 2026-11-21
Other engines
- M96 3.4 (996.1) · Documented
- M96.03 3.6 (996.2) · Documented
- M96.05 3.6 (996.2 / 997.1) · Documented
- M97.01 3.8 (997.1 S) · Documented
- M97.21 / .22 3.4 (987.1 S) · Documented
- 2.5 / 2.7 / 3.2 (986, 987.1) · Not documented
- Mezger 3.6 / 3.8 (Turbo, GT2, GT3) · Not documented
- V8 4.5 / 4.8 (Cayenne, Panamera) · Documented
- V6 (Macan) · Documented
The full data set lives on typenwerk.ai
Engines, generations, option codes and production data in one place, each figure with its source.